Elektrine lite

← Feed

@BananaTrifleViolin@lemmy.world

2026-11-15 07:12 UTC

Thats the boot manager not the BIOS? You need to go into the BIOS to disable secure boot. You need to press F2 immediately on restart. The BIOS has many more options including disabling secure boot and setting up a default boot order The boot manager is accessed via F12 and only shows you available devices to boot based on the rules in the BIOS. I installed Linux (Opensuse) on a Lenovo Yoga recently. I disabled secure boot prior to install and enabled USB boot to get the installer running. Your linux install failed as it didnt complete so its best to reinstall completely, and I agree with the prior poster: use balena etcher to make a fresh USB stick and verify the ISO is intact. Or Ventoy is a good tool to set up a USB stick with too - you can drop isos onto a USB stick and pick whichever one your want to boot from.

Replies (1)

  • @rotateabull@lemmy.ca 2026-11-15 19:05

    Thank you for clarifying that, I did not realize I was not in the BIOS menu there (very inexperienced at tinkering with computers as you can tell) I validated the ISO and downloaded balena. Flashing the USB drive now and will try that out.

    Open ##5541019