Elektrine lite

← Feed

@TrollAccount69@lemmy.ml

2026-11-08 01:06 UTC

Can you provide any more information that will help identify the mini pc? I really don’t wanna have to go geoguesser mode on image search to track down that case and point you at a heatsink that will fit. You have a reply saying that a heatsink won’t fix the problem. That person is deadass wrong. The problem is that the ssd gets hot when it does stuff. A passive heatsink provides more thermal mass and more surface area with a greater capacity to transfer its heat into the air. That will, 100% improve things. I am speaking from years of experience when I say the following: a half inch nut from the hardware store superglued to the package (the black “chip”) is enough to extend the functional life of almost every nand storage thing. The solution is to get that drives chip coupled to a piece of metal.

Replies (2)

  • @morto@piefed.social 2026-11-08 03:51

    Thank you four your help and for your humor. The case doesn’t have any labels of model numbers on the outside, so I don’t know the exact model. I got it from aliexpress a few years ago, but I deleted my account recently, so I can’t search my history. However, that fmc-bm20 indeed looks very similar. The holes in the back are at the same positions I even tried improvising a fan into the back, where those holes apparently suited for 2.5’’ drives are, but they’re exactly where the support holds the case on the table

    Open ##5500732

  • @alottafagina@lemmy.ml 2026-11-08 09:22

    You have a reply saying that a heatsink won’t fix the problem. That person is deadass wrong. I’m assuming you mean me. I suggest you read what I wrote again before you apply your “years of experience” because your terrible advice will leave OP with a dead PC in a couple years at best. I’m not saying an nvme heatsink won’t reduce the ssd’s temps. I’m saying you’re setting a heatgun at 100C, aiming it at the nvme and now attempting to fix the “heat issue” with a heatsink. The nvme temps are the tree in the forest and OP is better off addressing the core problem, airflow, which will both reduce nvme temps and prolong the life of the entire pc. The problem is that the ssd gets hot when it does stuff. A passive heatsink provides more thermal mass and more surface area with a greater capacity to transfer its heat into the air. That will, 100% improve things. Wrong. The SSD also gets hot when the rest of the PC “does stuff”, including the cpu and/or gpu which are often the leading contributers to internal temps. More thermal mass and surface area will mean little if the ambient temps are high. You have all these case manufacturers making high end cases with 8+ fan mounts for a reason - because of how important moving hot air away from the hardware components is. Your solution will absolutely not improve things a 100%. I am speaking from years of experience when I say the following: a half inch nut from the hardware store superglued to the package Please don’t do this OP. Superglue typically bonds two materials via chemical reaction and will damage your hardware, removal will also be a nightmare depending on the glue. I’m assuming OP wanted to say thermal adhesive but superglue sounds more “hack-ey” when trying to impress a novice I guess.

    Open ##5501657