2026-07-12 20:59 UTC
i have almost narrowed down how to use the MCP23017 and hardware interrupts. now i just need to experiment a bunch with a breadboard and arduino uno/pro micro so that i can actually try to put my version 2 together, at least on the wiring side of things. then i can get to prototyping the case and perhaps the pcb wouldn't hurt later down the line. but i think the first prototype should be on a large breadboard, and the second prototype should not use pcbs, only wires
Replies (1)
-
@spkry@sk.girlthi.ng 2026-07-12 23:35
so i miscounted the pins. turns out there are 18 easily accessible pins and the pinouts skip some pins. but! turns out, with some programming fuckery, you can desolder two thingies and you get two additional pins! now there are just microcontrollers with more easily available pins but i only got the pro micro and it's really common and really cheap so i wanted to use it for accessibility reasons. imagine my project pops off and people will be making it left and right - i need to make version 2 as cheap and accessible as i can! so i'll try this sometime, and for now, perhaps i can get by with arduino uno for testing