Elektrine lite

← Feed

@Niall@mastodon.nz

2025-06-14 09:46 UTC

@sidawson yeah, my battery stuff is still nominal 50V so I had to break them down. I'll be doing an install using complete EV batteries 'soon'. To make 50V I use 7 Leaf Modules in series. Much like the panels I've got the original setup that I built nicely, properly & tidy (6 modules in parallel so 7x6=42 modules). Then the 'temporary' which is 3 parallel (21 total) done ok but not very tidy. Then the 'very temporary' which is just 7 modules in a plastic tub. So that's 70 modules total. A Leaf has 48 so that's 1.45 of a Leaf. Pretty close! However they're all about 30-40% degraded so my capacity is only about 85% of an original 24kWh Leaf*. These batteries are from 2011 cars, essentially the worst of the worst and they're still working. They'll be recycled when they finally conk out. A little different to combustion based power isn't it?! *There's also the rideon mower's battery which is two warranty failure UBCO bike batteries but let's not get into that right now....

Replies (1)

  • @sidawson@mas.to 2025-06-14 10:00

    @Niall ha ha, 1.45 Leafs. Love it. Pretty amazing to repurpose 2011 cars (which otherwise would be chucked in a pile somewhere). I knew a guy who lived off grid - had a shed full of marine batteries - but I think you're living in the future, here. This is the new way (without forking out for some proprietary battery kit, of course). Neat that you can piece it all together like that - bits from here, there, everywhere. Super funky work.

    Open ##1500176