Elektrine lite

← Feed

@raffomania@mstdn.io

2026-08-11 12:33 UTC

@stombeur@mastodon.social Thanks! On the first image you can see some artifacts at the edges: when the gel roller draws over an existing line, it will sometimes stop the ink flow. moving back onto clear paper, the ink will usually start flowing again after a short distance. I suspect the inked parts have low friction, so the little ball in the nub stops rolling, stopping the ink flow.

Replies (1)

  • @stombeur@mastodon.social 2026-08-12 05:55

    @raffomania@mstdn.io I recently started using fountain pens and I am not switching back. Very fond of them now. Large ink reservoirs and smooth lines. I have the twsbi eco and the pilot kakuno like in this guide https://lostpixels.io/writings/fountain-pens-plotters - the pilot kakuno + a 70-converter is 25 euro or something so a good starter if you want to try (but you'll also need to have a rotator on the end of your plotter arm of course)

    Open ##5150322