Elektrine lite

← Feed

@punishmenthurts@autistics.life

2026-07-09 20:19 UTC

I suppose I’ve sort of explained my attitude, I’m taking it down to as small as I need it to be and it if breaks, I’ll eviscerate it and start the bolt on conversion. . I just feel I’m in a weird place about it all. I took the sides and the back of the neck off as far as I need to and as far as I dare. . Now I’ve installed the side dots, stained it, and I’m going out for a can of lacquer in a minute. I’ve finished this neck except for the setup and the frets, done my downsizing on it, I’m wokimg on a new logo and a new pick guard - and I have no idea if I’ve cured the end of life curve yet or made it worse. . I’m keeping busy, trying to let the glue cure as long as possible so I can’t tune it up to find out. I’ll either crash at the finish line or not, I guess. 🙄🥹💜 Ha - it’s still Schroedinger’s guitar . /37 #Luthier #Guitar #Framus12StringProject

Replies (1)

  • So in the interest of adding a little strength to this already broken and then pared down neck, I’ve carved a sort of a cleat between the nut end of the fretboard and the tuners, sort of extended the fretboard beyond the nut, and then cut a slot in the new piece for the nut, hopefully that will help. . Plus I polished up the logo and lacquered over it to hopefully stop the tarnishing. I had only polished the name when I took this pick, not the banner part yet. . And I’ve built a pick guard out of veneers, and the top layer is striped maple like the back and sides, but the same stain I used for the neck turned the pick guard chocolate brown, not in this guitar’s palette at all. I’ll have to paint it black after all. . A few little details, that, plus I have enough side dot materal left to do the four on the highest frets, #15- #21, at least on the right handed side. . There will be some finishing details but they can wait until the very end, if I can make it work. Now mostly, I have to see how long I can wait for the glue to cure before I string it and carry on setting it all up. The cleat resets the counter for that, I’m at Day One again. . EDIT TO ADD: I realized I really have no data, no previous experience of doing these things with these glues, the Revenant was a completely different job and when I did this sort of job before I hadn’t yet heard of hide glue, the Vega’s fretboard is never coming off again. I have no idea how long to wait. . I just guessed that I ought to give it a month, but having no real clue and nothing to do, I doubt I’ll be able to wait that long. I suppose a week after the cleat thingy (and two weeks after the break and the fretboard) is my guess at a minimum, that’s when waiting will get difficult. That would mean next weekend. 😬🫣🎶 . /38 #Luthier #Guitar #Framus12StringProject

    Open ##4647753